E

EDUR Centrifugal Pumps for Propane, Butane, LPG and Liquefied Gas

EDUR Centrifugal Pumps for LPG Applications – 15 to 160 m³/h

PPTEC-ENERGY supplies EDUR centrifugal pumps for LPG, propane, butane and propane-butane applications. The EDUR centrifugal pumps of the NHE and NHKE series are suitable for demanding industrial applications involving liquefied gases and other liquid media.

EDUR pumps for LPG are used in LPG storage facilities, LPG filling plants, propane and butane transfer systems, LPG terminals, industrial gas supply systems and liquefied gas installations.

Depending on the selected pump type and operating conditions, EDUR centrifugal pumps can cover capacities from approximately 15 to 160 m³/h. This allows EDUR pumps to be used for both medium-sized LPG installations and high-capacity industrial propane-butane systems.

EDUR Pumps for Propane, Butane and Propane-Butane

The pumping of propane and butane requires carefully selected pump technology. LPG is stored and transported as a pressurized liquefied gas, which places specific requirements on the pump and the complete hydraulic system.

EDUR centrifugal pumps can be used for the transfer of propane, butane and propane-butane mixtures, provided that the selected pump configuration is suitable for the actual medium and operating conditions.

When selecting an EDUR LPG centrifugal pump, PPTEC-ENERGY considers the complete operating conditions of the installation, including:

• Pumping medium: propane, butane or propane-butane mixture
• Required flow rate
• Inlet pressure
• Outlet pressure
• Differential pressure
• LPG temperature
• Density of the liquid
• Vapour pressure
• Suction conditions
• NPSH requirements
• Piping configuration
• Required motor power
• Operating conditions
• Installation requirements

The correct selection of an EDUR pump for LPG is essential for reliable and continuous operation of the complete liquefied gas system.

EDUR NHE and NHKE Centrifugal Pumps

The EDUR NHE and NHKE centrifugal pumps provide solutions for different industrial pumping applications.

Depending on the required operating point, EDUR NHE pumps and EDUR NHKE pumps can be selected for different flow rates and pressure requirements.

For propane, butane and LPG applications, the actual operating point is particularly important. The required flow rate, differential pressure, suction conditions and physical properties of the liquefied gas must be taken into account when selecting the EDUR centrifugal pump.

PPTEC-ENERGY supports customers in selecting the appropriate EDUR NHE or NHKE centrifugal pump for LPG applications.

EDUR Pumps with Capacities from 15 to 160 m³/h

PPTEC-ENERGY offers EDUR centrifugal pumps for flow rates from approximately 15 to 160 m³/h.

This flow range allows EDUR pumps to be used in a wide variety of LPG and liquefied gas applications, including:

• LPG storage facilities
• Propane storage systems
• Butane storage systems
• Propane-butane storage tanks
• LPG transfer systems
• LPG loading and unloading systems
• LPG filling plants
• LPG cylinder filling plants
• LPG bottling plants
• LPG terminals
• Liquefied gas transfer systems
• Industrial LPG supply systems
• Propane transfer systems
• Butane transfer systems
• Propane-butane transfer systems
• LPG pump stations
• Industrial liquefied gas installations

EDUR Centrifugal Pumps for LPG Storage Facilities

In LPG storage facilities, large quantities of propane, butane or propane-butane must be transferred safely and reliably.

EDUR centrifugal pumps can be used for transferring LPG between storage tanks, supplying LPG filling systems or transferring liquefied gas to other parts of an installation.

For higher-capacity applications, EDUR NHKE centrifugal pumps can provide a suitable solution. Depending on the selected configuration and operating point, flow rates of up to approximately 160 m³/h can be achieved.

The final pump selection must always be based on the actual operating conditions of the LPG installation.

EDUR Pumps for LPG Filling Plants

EDUR centrifugal pumps for LPG can also be used in LPG filling plants where a reliable supply of liquid propane-butane is required.

LPG filling operations require a stable and reliable flow of liquefied gas. The correct EDUR LPG pump must therefore be selected according to the required filling capacity, system pressure, piping arrangement and operating conditions.

PPTEC-ENERGY supplies and supports the selection of EDUR centrifugal pumps for LPG filling plants, LPG transfer systems and propane-butane installations.

EDUR Propane-Butane Pumps

Propane-butane pumps are designed for the transfer of liquefied propane, butane and LPG mixtures.

When selecting an EDUR centrifugal pump for propane-butane, it is not sufficient to consider only the required flow rate. The suction conditions, vapour pressure, liquid temperature, inlet pressure, differential pressure and NPSH conditions are also important.

For this reason, every EDUR LPG centrifugal pump should be selected according to the actual operating point of the installation.

PPTEC-ENERGY provides technical support for the selection of EDUR pumps for propane, butane, propane-butane and LPG.

EDUR LPG Pumps for Liquefied Gas Applications

The term LPG pump includes pumping systems designed for the transfer of liquefied petroleum gas such as propane, butane and propane-butane mixtures.

EDUR NHE and NHKE centrifugal pumps can be selected for suitable LPG applications depending on the required operating conditions and pump configuration.

Typical applications include:

EDUR propane pumps, EDUR butane pumps, EDUR propane-butane pumps, EDUR LPG pumps and EDUR liquefied gas centrifugal pumps.

With capacities ranging from approximately 15 to 160 m³/h, the EDUR pump range provides solutions for different LPG applications, from smaller transfer systems to larger industrial LPG installations.

Why EDUR Centrifugal Pumps for LPG?

The correct selection of an LPG centrifugal pump is an important part of every liquefied gas installation.

The pump must be suitable for the pumping medium and must reliably achieve the required operating point. At the same time, the pump must be correctly integrated into the complete LPG system.

EDUR centrifugal pumps provide reliable industrial pumping technology and can be configured for suitable applications involving propane, butane and propane-butane.

PPTEC-ENERGY combines EDUR pump technology with experience in the design, supply, modernization and servicing of LPG systems and liquefied gas installations.

Our objective is not simply to supply an EDUR pump, but to provide the correct technical solution for the complete LPG application.

Technical Selection of EDUR Pumps for LPG

For the correct selection of an EDUR centrifugal pump for propane-butane, the following operating data are normally required:

• Flow rate in m³/h
• Inlet pressure
• Outlet pressure
• Differential pressure
• Temperature
• Pumping medium
• Propane, butane or propane-butane mixture
• Liquid density
• Vapour pressure
• Required operating point
• Piping dimensions and configuration
• Electrical power supply
• Installation conditions
• Required operating hours

Based on these parameters, the appropriate EDUR NHE or NHKE centrifugal pump can be selected for the required LPG application.

EDUR Centrifugal Pumps from PPTEC-ENERGY

PPTEC-ENERGY is your technical partner for EDUR pumps for propane, butane, LPG and liquefied gas applications.

We support customers with:

• Selection of the appropriate EDUR centrifugal pump
• Hydraulic pump selection
• Selection of EDUR NHE pumps
• Selection of EDUR NHKE pumps
• Pump selection for 15 to 160 m³/h
• Propane pump applications
• Butane pump applications
• Propane-butane pump applications
• LPG pump applications
• Integration of EDUR pumps into existing LPG systems
• Replacement of existing LPG pumps
• Modernization of LPG pumping systems
• Supply of EDUR pumps and accessories
• Technical consultation
• Pump application engineering
• Service and technical support

EDUR Centrifugal Pumps for Propane, Butane and LPG – 15 to 160 m³/h

If you are looking for an EDUR centrifugal pump for propane-butane, an EDUR LPG pump, an EDUR liquefied gas pump, an EDUR NHE pump or an EDUR NHKE pump, PPTEC-ENERGY can support you in selecting the appropriate solution.

EDUR – Centrifugal pump technology for industrial LPG and liquefied gas applications.

PPTEC-ENERGY – Your partner for EDUR pumps, LPG pumps, propane pumps, butane pumps and centrifugal pumps for liquefied gas applications.

EDUR pumps and pump units are available in various performance ranges, from 18 up to 160 m³/h.

• Group I consists of pumps with the following capacities (NHKE 404; NHKE 407; NHKE 409; NHKE 603; NHKE 605; NHKE 607):
  15, 25, and 30 m³/h
• Group II consists of pumps with the following capacities (NHE 603; NHE 606, NHKE1003; NHKE 1006):
  40, 60, 80, and 100 m³/h
• Group III consists of pumps with the following capacities (NHKE 1003; NHKE 1004; NHKE 1006):
  120, 140, and 160 m³/h

All pumps in these three groups are available with differential pressures ranging from 5 to 12 bar .